BESS Solution Configurator

Application

Select Application & Region

Choose your region, country and preferred language, then select your application scenario.

Continent

Country / Region

Language

Please select a continent and country to continue.

Application Scenario

Commercial & Industrial

Battery storage for commercial and industrial sites. Peak shaving, demand response, backup power and off-grid capability.

Grid-connected BESS

Best for: Factories, shopping centres, office buildings and industrial facilities connected to the grid.

Reduce peak demand charges by discharging during high-tariff periods
Provide backup or off-grid power during grid outages
AC-coupled — compatible with existing solar installations with their own inverter
DC-coupled Hybrid option available if installing new solar PV without a separate inverter

Utility

Grid-scale storage for frequency regulation, arbitrage and large-scale renewable integration.

Utility Scale BESS

Best for: Utilities, grid operators, IPPs and large renewable energy project developers.

Frequency regulation and ancillary services for grid stability
Energy arbitrage — charge at low-price periods, discharge at peak
Firming capacity for wind and solar farms
Scalable via AC-side parallel connection

Microgrid

Multi-source microgrid integrating solar PV, battery storage and diesel generator for full energy independence.

Microgrid + PV + Diesel

Best for: Remote sites, islands, mining operations, telecoms towers and communities without reliable grid access.

Combine solar PV, BESS and diesel generator under one control system
Dramatically reduce diesel fuel consumption and operating costs
Can operate fully off-grid or as a grid-backup system
Teplore provides full system integration and controls engineering

Please select an application to continue.

System

System Configuration

Select AC power output first. Compatible DC capacities appear automatically. Duration ≥ 2h required (0.5C battery). i

AC Power Output

PCS Power

Battery Capacity

Battery Capacity per Unit i

Select AC power first, then choose a compatible DC capacity.

Greyed options have Duration < 2h and are not compatible with the selected AC power.

Total System Specification

—

Please select both AC power and DC capacity to continue.

Controls

EMS, Controls & Site Information

Configure your energy management system and provide site information where applicable.

Microgrid Site Information

Existing Site Infrastructure

Tell us about your existing site infrastructure. This helps Teplore design the right microgrid control strategy.

Grid Connection

Is the site connected to the utility grid?

kVA

Grid Capacity

Diesel Generator

Is there an existing diesel generator at the site?

Generator Capacity

Controller Model (optional)

Solar PV

Is there existing or planned solar PV at the site?

kWp

PV Array Capacity

⚠ Please ensure at least one additional power source is selected for a functional microgrid. A standalone BESS without grid, generator or PV is not a microgrid configuration.

Load Information

Site Load Profile

Starting Power

Peak power demand during equipment startup (e.g. motor inrush current). Used to size the BESS discharge capacity.

kW

Running Power

Steady-state power consumption during normal operation. Used to calculate daily energy requirements.

kW

Teplore PowerView (Optional)

Teplore's own monitoring and control platform. Provides local visualisation, real-time data. Can be used standalone or alongside a third-party EMS. Billed per point of connection.

Third-Party EMS Integration

Do you require integration with a third-party Energy Management System? Select from our pre-integrated partners below, or specify your preferred vendor.

Customisation

System Customisation

Specify environmental and performance requirements. Standard values are defaults; upgrades are available on request.

Corrosion & Climate

Anti-Corrosion Rating i

Default: C4 — suitable for most industrial environments. Upgrade to C5 for marine, coastal or heavy industrial sites.

Ambient Temperature Range

Default: −20 to +55°C. Upgrade to −40 to +55°C for extreme climates.

Noise Level i

Default: ≤ 70 dB(A) — suitable for industrial environments. Upgrade to ≤ 60 dB(A) via additional acoustic accessories, suitable for residential areas.

Additional Components

Optional Hardware Add-ons

MV Transformer

Medium voltage transformer for direct MV grid connection.

Motorized Breaker

Remote-controlled circuit breaker for automated disconnection and protection.

Services

Warranty & Service Options

Select warranty coverage, service requirements and shipping terms.

Warranty

Warranty Period

Warranty Coverage

Default: 5 Years free warranty included. Extended coverage available at additional cost.

Installation & Commissioning

On-Site Services

Installation Service

Teplore provides professional mechanical installation at your project site.

Grid Commissioning

Default: Remote commissioning. Upgrade to on-site engineer for in-person grid connection and testing.

Operations & Maintenance

Annual O&M

Annual O&M Service

Teplore can provide annual on-site O&M. Alternatively, Teplore offers operator training so your team can self-maintain the system.

Shipping & Logistics

Shipping Terms & Container Summary

Incoterms / Shipping Mode

Default: FOB Shanghai. Select your preferred trade term.

FOB Shanghai — Teplore delivers goods to Shanghai port. Buyer arranges and pays for all freight and insurance from there.

Sea Freight Summary

—

🕐 Standard lead time: 4–6 weeks from order confirmation

System Summary

—

Total Battery Capacity

—kWh

Total AC Power

—kW

Duration

—h

Main Equipment

Battery Cabinets (DC)

—

AC Cabinets

—

Depth of Discharge

—

Battery Brand

CATL

Cooling

Air cooled

Switchgear & Protection

ABB / Schneider

MV Transformer

—

Motorized Breaker

—

Controls & EMS

Teplore PowerView

—

EMS Integration

—

SCADA System

—

Services

Warranty

—

Commissioning

—

Installation

—

Annual O&M

—

Anti-Corrosion

—

Temperature Range

—

Logistics

Incoterms

—

Port / Address

—

Lead Time

4–6 weeks

Project Footprint

—

⚠

Not Included in Scope of Supply

·Site civil works & foundations

·AC & DC power cabling

·Grid connection & metering

·On-site installation labour

·Import duties & local taxes

·Local permits & approvals

These items are the responsibility of the buyer or EPC contractor. Teplore can provide technical guidance upon request.

Contact

Request Your Solution

Submit your details and our sales team will follow up with a tailored proposal.

Contact Information

Your inquiry will be sent to sales@teplore.com

First Name *

Last Name *

Company *

Country *

Email *

Phone

Attachments (optional)

📎 Attach files (single-line diagrams, site plans)

Project Notes (optional)

Configuration Summary (attached to inquiry)

—

Please fill in all required fields.

Sales Enquiries

sales@teplore.com

Technical Support

support@teplore.com

General Inquiries

info@teplore.com

✅

Inquiry Sent!

Thank you! Our sales team will contact you within 2 business days with a tailored proposal for your system.

sales@teplore.com

Follow Teplore on LinkedIn for updates